Extender.linksys.com - Linksys Extender Setup - Extender Login

Linksys extenders are helpful in extending the range of your WiFi network. Also, they expand internet speed by connecting to your router quickly. These extenders work perfectly to bring networks in the dead network zones. Moreover, one can pair the same with an old or existing router. Henceforth, there is no need to change or buy a new router to pair the same with Linksys extender.

Linksys range extenders are ideal to be used in the office or at home. You can easily connect it with your tablet, iPhone, PC, or laptop. To configure the same, one can refer to the set of instructions that we have rounded in this blog to assist the users with their Extender.linksys.com setup.

To assist the users in setting up their Linksys extender manually without facing issues, we have given simple instructions below:

• First, we advise the users to switch on their system. They can carry on the process on a PC or laptop.

• After that, they must check for a robust internet connection's availability.

• Next, you have to connect your system using an Ethernet cord.

• Therefore, you have to plug the Ethernet cord's one end into your laptop or PC’s internet port.

• Then, plug the other end of the same Ethernet cord into the extender’s data port.

• Make sure that the Ethernet cable you are using must be working fine.

• After that, plug your Linksys WiFi range extender into an electrical outlet to turn it on.

• Then, run a reliable and secure internet browser on your system to avoid network privacy issues.

• Further, you should enter the link 'http://extender.linksys.com.'

• Type this link in the navigation address bar and tap the enter key after that.

• As a result, the official Linksys Login page will come up on the screen.

• On the official Linksys login page, you must type the correct login credentials.

• Further, type the network name of your existing router in the specific field when the Extender.linksys.com setup screen loads.

• Later, you have to go with the manual option.

• After that, switch your extender off for about 2 minutes.

• Now, you have to switch on the Linksys WiFi range extender.

This way, you are done with Extender.linksys.com manual configuration.

To help you with the Linksys extender setup with WPS, we have given the steps below:

Configuration through WPS Key

• First, you have to plug in the Linksys WiFi range extender into a power outlet.

• Then, turn the power socket’s switch on.

• After that, search for the WPS key on your Linksys extender. You may find it on the extender’s rear side.

• You have to push the WPS key and hold it for few seconds.

• As a result, the LED light on your extender blinks.

• It displays the status of your Linksys extender connection.

• If the power light on your Linksys extender is stable, that means your extender is configuring with the router.

• Now, you have to replicate the process with your router, too.

• Therefore, search the WPS key on your router.

• Then, press and hold it for few seconds.

• Now, notice your router’s LED light. It must be blinking.

• When you find the LED lights on both your router and extender gets solid green and stops blinking, the connection is successful through Extender.linksys.com WPS network.

Configuration through WPS PIN

• To opt for your extender’s configuration through WPS PIN, you must have the PIN number available with you.

• For this, first, you have to run a web browser.

• Then, move to the navigation bar to begin searching for the Extender.linksys.com page.

• For this, input the same in the search bar, and tap enter to load the page.

• The WPS PIN option visible on the page will prompt you to input the extender’s PIN to configure the network.

• Hence, type the PIN number in the respective field and confirm.

This reading piece provides detailed step-by-step information about the configuration of your Linksys extender through Extender.linksys.com. Follow the steps accurately to avoid issues.