Step by Step Instructions

TiteTie is as easy as 1. 2. 3.

1. Load TiteTie onto the rope at a position that suits you...

2. Loop the rope through an anchor point or handrail...

3. Lock your cargo tight by pulling down on the rope.

How it Works
When tension is applied to the rope or webbing the TiteTie's patented Press-n-Grip 3V Design does its work. What makes the Press-n-Grip 3V Design so special is that two results are created from one action. Firstly, a gripping effect is created on the three Vs holding the TiteTie on the rope stopping it from slipping or sliding down.

Secondly, at the same time the rope or webbing squeezes the two TiteTie pieces together creating gripping force on the lower hooks.

When the rope or webbing is placed between the two lower hooks, the force on the lower hooks prevents the rope from slipping back, resulting in holding power without tying any knots.

TiteTie Photo Step-by-Step

Instructions

Stack both of the TiteTie pieces together and hook the TiteTie on the rope.
Bring the rope down to the left notch.
Move the rope under the TiteTie to the right notch.
Loop the rope up and into the middle notch.
Bring the rope down to the anchor point on your vehicle or trailer and loop it through.
Take the rope back up to the TiteTie.
Slide the rope on the lower hook of the TiteTie between the two pieces.
Pull the rope down to lock in and tighten on the cargo.

To release the rope from the TiteTie simply pull the rope up and out of the lower hooks.

Printable Version
Click on the image below to open a printer friendly version

NEWS