Sailing with Pinčika

Home‎ > ‎Techincalities‎ > ‎

Mast and jib halyard setup data for Wayfarer World

The following data was provided by Ralph Roberts, measurements taken from his 'Spree Lady'.
It should be noted that it differs slightly from measurements for other Wayfarer marks.

 Mast rake Tape measure hauled up on main halyard,
 from top black band to underside of
 mainsheet track in centre of tiller port
 7135 - 7190 mm
 Spreader length Measured from mast-wall (rivet) to shroud 553 mm
 Spreader deflection From luff groove to straight-edge across
 shrouds
 200 mm
 Spreader span Measured from shroud to shroud 1060 mm
 Shroud tension Light to Heavy winds 300 - 350 lbs
 136 - 158 kg


Foresail halyard data (specific to Pinčika):

Wire 7 X 19, dia. 3mm, hard eye + soft eye
Length = 5855mm (+cca 2cm, instead of small shackle above top furling drum => would be better)
Length LP = 50mm
Hard Eye + Soft Eye