By © Purplechick Creations
Any resemblance to another tutorial is purely coincidental
and unintentional.
This tut uses PSPX2 but can be used with other versions.

Please do not share this or place on another website!!

Supplies
* Scrapkit Carlisle Cullen by SID . It's a payed kit and you can buy it at Aussie Scraps
* Graphics of your choice, I used a picture from the movie twilight.
* Template 57 by Crystal, found here
* A font of choice, I used cimbrian and you can find it here
* Optional, Eyecandy 4000/gradient glow.
* My supplies here

Remember to save often :-)
Have fun!!

1 Open the template in psp.
2 Image/Resize to 600 pixels, all layers CHECKED, using smart size.
3 Delete the numbered toplayer.
4 Delete the two photo layers. (or you can use this with two photo's of course but I wanted to use the frame from the kit)
5 Open the frame2 in psp.
6 Image/Resize with 10%, (Note: there can be a small difference in size, so just resize to your liking, also Nicole has two kits, the taggers and the normal kit so it depends on what kit you use!)
7 Edit/Copy, Edit/Paste as a new layer.
8 Move to the right side of the big journaling box, see my tag for reference.
9 Click inside all parts of the frame with your magic wand with these settings:



mode add shift, match mode rgb value, tolerance 1, contiguous checked, feather 0, anti alias checked, outside checked.

10 Selections/Modify/Expand with 3 pixels.
11 Open the picture in psp.
12 Edit/Copy, Edit/Paste as a new layer.
13 Move inside of the frame, resize if needed and when you're satisfied with the picture go to Selections/Invert and hit delete once on your keyboard.
14 Move this layer under the framelayer.
15 Selections/Select none.
16 Give the framelayer a dropshadow of choice or use mine:



Vertical: 2
Horizontal: 2
Opacity: 55
Blur: 5
Color: black
Shadow on new layer UNchecked.

17 Layers/Merge/Merge down.
18 Open two of the papers from the kit, I used paper 5 and paper 6
18 Image/Resize to 600 pixels
19 Edit/Copy paper 5
19 Go to your backgroundlayer
20 Selections/Select all
21 Edit/Paste/Paste into selection.
22 Selections/Select none
23 Edit/Copy the other paper.
24 Go to layer 2, named paper scrap.
25 Selections/Select all
26 Selections/Float.
26 Selections/Modify/Expand with 1 pixel.
27 Edit/Paste into selection.
28 Selections/Select none.
29 I colorized the stichtes but it's up to you, if you want to go to selections/select all, Selections/Float, Selections/Defloat and fill the stitches with the color of choice, when you're done, you select none again.
30 Open my wordart ( I used the words from the kit, they are lovely) in psp.Of course you can write whatever you want :-)
31 Delete the journaling layer.
32 Edit/Copy, Edit/Paste as a new layer.
33 Move inside the journal mat.
34 Open the paperflower in psp.
35 Image/Resize with 10%, all layers CHECKED.
36 Edit/Copy, Edit/Paste as a new layer.
37 Move this on the spot of the flowerlayers and delete the two layers from the template called flower.
38 Layers/Duplicate
39 Image/Resize with 70%, all layers UNchecked.
40 Move to the left side of the tag , see mine for reference.
41 Open the brad from the kit.
42 Image/Resize with 15%, all layers CHECKED.
36 Edit/Copy, Edit/Paste as a new layer.
37 Image/Free rotate with 90 degrees, left checked, the other boxes UNchecked.
38 Move on top of the flower on the right.
39 Layers/Duplicate.
40 Image/Mirror.
41 Image/Resize with 70%, all layers UNchecked.
42 Move to the left side of the tag , on top of the other flower, see mine for reference.
43 Delete the two buttonlayers from the template.
44 Open one of the pen tubes in psp.
45 Image/Resize with 15%, all layers CHECKED.
46 Edit/Copy, Edit/Paste as a new layer.
47 Image/Free rotate with 90 degrees, left checked, the other boxes UNchecked.
48 Move to the left side of the tag, see mine for reference.
49 Open carlisle charms in psp.
50 Image/Resize with 15%, all layers CHECKED.
51 Edit/Copy, Edit/Paste as a new layer.
52 Move to the bottom of the tag, see mine for reference.
53 I used my eraser tool to remove some parts of the chain.
53 Open one of the bows from the kit in psp.
54 Image/Resize with 8%, all layers CHECKED.
55 Edit/Copy, Edit/Paste as a new layer.
56 Move on top of the edge of the chain
57 Layers/Duplicate
58 Image/Mirror
59 Move to the other side of the chain.
60 Give everything a dropshadow of choice
61 Layers/Merge visible.
62 Image/Add borders with these settings:



5 pixels, symmetric checked. A dark color from your tag

63 Repeat with a light color
64 Repeat again with the dark color
65 Selections/Select all
66 Selections/Modify with 15 pixels
67 Selections invert
68 Effects/3d-effects/Inner bevel with these settings:



Bevel 2, Width 10, Smoothness 40, Depth 6, Ambience 0, Shininess 0, Angle 315, Intensity 50, Elevation 30.

69 Take your texttool and write your name
70 I used a ligth color from the kit in the background and a dark color in the foreground, stroke width set to 1
71 Layers/Convert to a raster layer
72 Give it a dropshadow of choice or use eye candy 4000, with a dark color from the kit and the glow width set to 3
73 Image/Resize with 80% or to your liking.
74 Add your watermark and the credits if necessary.
75 File/Export as a jpeg :-)

That's it!!!
I hope you had fun making this tag
huggers Paola