Introduction
The BiaQIm IP Suite is installed by running a single MS Installer (.msi) file. You simply double-click on the file BiaQImx32.msi (for the 32 bit version) or BiaQImx64.msi (for the 64 bit version) and follow the simple installer instructions.
BiaQImx32.msi is a 55.5 MB file and BiaQImx64.msi is 64.9 MB. Unfortunately GoogleSites limits the size of any single downloadable file to 20 MB. For this reason I have had to 'split-up' these installer files into smaller chunks so you can download them but you will have to 'stitch' them back together into one file before they will be of any use. Follow these steps to do that:

Step 1
Download all the component files for your chosen version (whether 32 bit or 64 bit) into the same folder. There are 4 component files in the 32 bit version and 5 in the 64 bit version.

Step 2
Change the name of the file called StitchBiaQImx32 (or StitchBiaQImx64) to StitchBiaQImx32.bat (or StitchBiaQImx64.bat).

Step 3
Double-click the .bat file you have just created in step 2. A 'DOS prompt' should briefly flash up onto the screen as the component parts are stitched together into one msi file called BiaQImx32.msi (or BiaQImx64.msi). If you do not see this file after a few seconds press the F5 key on your keyboard to refresh the display of your folder. If you still do not see the msi file then something has gone wrong.

Step 4
Double-click the .msi file and follow the simple automated installation process. Congratulations! - you have now installed the BiaQIm Image Processing Suite.