Buggy Base GT Car Rules

These will be the perlimanaries rules as of right now. 

1. Upgrade brakes.
2. Upgrade radio gear (servos, linkage, receiver and radio).
3. Add sway bars (front and rear)
4. Shock and diff oils can be changed.
5. Any shock position, caster position, ect., provided by the car (no drilling holes).
6. You may use a starter box, but pull-start must remain intact and operational.
7. Clutch gearing may change (14-15 first gear, 17-18-19 second gear, kyosho only).
8. Replacing threaded links with turnbuckles.
9. New engines price will be kept under $200 street price no discounts will not will be allowed. i.e. sponsorships and or employee discounts at HTU.  We will be coming up with a engine list rule that the club can all agree on soon.

Tires must be fully covered by the body. Treaded kit tires may be used. Tires must be
rubber. NO foam tires. Tire must be used as produced by the manufacturer.

Body Rules

Must be a full body (GT, sedan etc no buggy, truck, suv bodies)
1. Body must be cut on the manufacturer line.
2. You may cut the rear of the body no higher than 1 1/8th" when sitting flat on a surface.
3. Side window may be cut open for fueling.
4. Front window may be cut, but no larger than 3x3.
5. Rear window may be cut
6. You may cut a hole for the glow plug ignitor.
7. Fueling access may be cut but may not connect with other holes.
8. Wing must be attached to the body and not the chassis.

These are the only changes allowed to the vehicle from the box.