I built this to take the load off my servos while setup, tinkering and to hang Clyde up at night. He cost too much to just leave slumped on the table!
Robot test stand:
- 1 x 10' 3/4" sch40 PVC pipe
- 2 x 90 deg 3/4" PVC elbow
- 3 x 3/4" PVC 'T' fitting
- 5 x 3/4" PVC end cap
- 1 x PVC cement
- 2 x Eyebolt / nut 1/4" x 2 5/8" (2 pack)
- 2' TNSO chain
- Total Cost: $13.47
|
|
|
|
