To access the vTakes menu in any given Track
- Tap the "Track Parameter" button
- Tap the status key of the require Track (it will turn orange)
- Scroll down to the vTake display (it's below the Fader display)
How to switch to a new vTake
- Turn the dial until an empty vTake is displayed.
How to move a vTake
Follow steps 1-3 above to access the vTake display then:
- Tap the [Function] button until "Move" is displayed. Tap [Enter]
- The destination is displayed; if it is empty an "E" will be shown.
- Use the L&R cursor to select a Track and the Dial to select the vTake. Tap [Enter] when ready.
- Confirm the move by tapping [Enter] again.
Access the other vTake edits
Follow steps 1-3 above to access the vTake display then:
Tap the [Function] button until the required edit is shown.
| Erase | Completely remove the recording, leaving the vTake blank. | | Copy | Replicate the recording on another vTake | | Move | Move the recording to another vTake | | Exchange | Swap the recordings on two vTakes | | Import | Bring in a recording from a different project. |
|
|