HEADS UP!!! I START MY SUMMER SCHEDULE AT MY "REAL SUMMER JOB" (JUNE TO SEPT) AND CAN & WILL BE AWAY FROM MY COMPUTER UP TO 2 WEEKS AT A TIME, SO GIVE YOURSELF LOTS OF TIME WHEN ORDERING. I SHIP ONCE A WEEK, TYPICALLY.
Thanks for stopping to see us at the GWA event in PA. We plan to be at: Iola, WI. & Rockford, IL. events and maybe some others as our schedules allow.
BLANK CARTRIDGES:
Before you start:
- MIL SURPLUS -- Military Surplus ammo & Blanks made from it, can & will contain corrosive componets. Sparying your action (after use) with water followed by spraying with WD-40 (or something similar) until you can clean, may help curb corrosive residue? ALL Blanks are typically nasty dirty, SO clean your piece/ weapon after each use for best results.
UNITED STATES:
.30 Caliber, 30.06 M1909 type:
(LIMITED SUPPLY, email first to make sure we have enough daveww2@aol.com )
-
1.) Our Load, M-1 Rifle (Garand) 30.06 for BFA'd M-1 Garands. Cost: = $15.00 per 50rds. + Shipping. (In Stock) (M-1 Garand, "Screw On Type/ Tube style" BFA Orifice size = .156 (5/32nds) to.187 (3/16s) typical Orifice. Hollywood type (Set Screw) & "Pops" BFA = .187 (3/16s) typical Orifice) Test fire and decide what BFA Orifice works best for your weapon. These are short star crimp (similar in size to Mil. Issue 1909 Blanks) and will function in M-1 Garands. They should function in: BARs, 1917s & 1919s Machineguns as long as those weapons are set up (BFA'd) to fire the 1909 Mil. Issue Blank. May require some adjustments to the weapon like the gas settings or the BFA Orifice. (IN STOCK)
- 1a.) 30.06 Factory Loaded, Brand New Brass. M-1 Garands & Bolt Actions. Will be much more exspensive than our loads. But may be only choice for us due to Industry wide Shortage in Brass, Powder, Primers... . (Possibly Coming Soon)
-
2.) Loaded M-1 Garand Bandoleers, $35.00 each + shipping. They contain: 48rds of our M-1 Garand Blanks, loaded into 6 M-1 Garand Charging Blocs (en Blocs) Clips with Cardboards, Bandoleer and Safety Pin.$ (Bandoleers from Service of Supply) Ammo from us and clips & cardboads are surplus) (IN STOCK)
-
3.) 30 Caliber Rifle, 30.06 for Bolt Actions Cost: =$15.00 per 50rds. + Shipping.
These are short crimp, loaded specifically for Bolt Action Rifles ONLY with NO BFAs. 1917 Enfield, 1903 Springfield. BLANKS ARE IN USE ALREADY AT THE GWA SITE IN NEWVILLE PA. DO NOT use in BFA'd weapons, probably won't cyle. (Limited supply, email before ordering = daveww2@aol.com )
.30 M-1 Carbine
-
$18.00 per 50rds, 5/32nds to 3/16s BFA Orifice. (SOLD OUT) Not recomended for use with Dutch or Military type "clip on" BFA UNLESS that BFA has been Modified for HOT Blanks.
.45acp:
-
1.) .45 for BFA'd 1911s, does not require ejection port to be made bigger: $14.00 for 50rds. .152 BFA Orifice in "Hollywood" type threaded barrel BFA -- ALWAYS start with biggest and work downwards to best function. (SOLD OUT)
-
2.) .45 for 1917 Revolvers. $14.00 per .50rds plus shipping. (email daveww2@aol.com for availablity)
-
3.) .45 for Thompson/ Subgun, full length, $29.00 for 100rds, (SOLD OUT) .152 Orificed BFA (Threaded barrel) with 1 Spring removed in KAR semi-auto Thompson. ALWAYS start with the biggest BFA and work downwards to best function. TO HOT FOR 1911s, DON'T USE IN 1911s, 1917s or PISTOLS!!!
.38 S & W & Spec. (Revolver)
-
$7.00 per 50rds + Shipping. (SOLD OUT)
.32 S&W
-
$15.00 per 50rds. (Sold Out)
308 NATO/ 7.62 x 51mm:
-
1.) Full Length Plastic Blank, $6.00 per 50rds + shipping (German Mil. Surplus) (In Stock) Use in Bolt actions only! If you use in Machine-guns & Semi-Autos you do so against Maker & German Army recomandations -- use at your own risk! I know of 1 German Reenacting Unit that uses these in their Full Auto 308 MG34 & 42 Machine-Guns without a noted problem -- so go figure?
-
2.) 7.62 x 51mm (308 NATO) All Brass, Full Length, Crimped Blank (Mil. Surplus) $14.00 per 100rds + Shipping (Coming Soon)
5.56mm/ .223
-
1.) $20.00 per 100rds + shipping (US Mil Surplus) (SOLD OUT)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
GERMAN:
8mm:
-
1.) 8mm LONG (made from 270 Brass) $15.00 per 50rds + shipping (LIMITED SUPLLY, email before ordering daveww2@aol.com )
-
2.) 8mm (Long) (made from 308 Brass) $7.00 per 50rds + shipping (Coming Soon) Use in Bolts ONLY! Use in auto loaders ay your own risk!
-
3.) 8mm Full Length (made fromSpecial long 8mm brass) $24.00 per 60rds + shipping (SOLD OUT) (BFA Info for MGs 08,34 & 42 & G/K 43s: .140 to .187 Orifiice--depending on your weapon & BFA method, ALWAYS start with biggest BFA Orifice and work down to BFA Orifice that gives you best smoothest function = start with .203 or bigger and work down towards .140)
9mm, 9 x19mm:
-
1.) 9mm, Full Length, Blank, $13.00 per 50rds (In Stock) (.125 to .136 or.140 BFA, depends on weapon & type of BFA)
-
2.) 7.62 x 25mm 3/4 Length Blank (Mil. Surplus) $10.00 per 100rds (in Stock) contains corrosive componets.
.44 Mag. (Reich's Revolver) $15.00 per 50rds + shipping. (By request only)
-----------------------------------------------------------------------------------------------------------------------------
BRITISH COMMONWEALTH:
9mm STEN GUN:
-
1.) 9mm, Full Length, Blank $26 per 100rds + shipping (In Stock) (.125 to.136 or .140 depending on weapon & type of BFA)
-
2.) 7.62 x 25mm 3/4 Length Blank (Mil. Surplus) $10.00 per 100rds (in Stock) contains corrosive componets.
.303 British:
-
1.) .303 (Short) Military Surplus, $17.00 per 50rds + Shipping. (LIMITED SUPPLY, email daveww2@aol.com before ordering)
-
2.) .303 Full Length Blank, $24.00 per 60rds (SOLD OUT)
-----------------------------------------------------------------------------------------------------------------------------
SOVIET RKKA:
7.62 x 54R:
-
1.) 7.62 x 54R Short, For 91/30s, $6.00 per 50rds + Shipping. (Mil. Surplus) (In Stock) may work in short Blank modified SVTs but don't have recommended Orifice for BFA or gas setting.
-
2.) 7.62 X 54R Full Length Blank: $24.00 per 60rds (SOLD OUT)
Nagant Pistol:
-
$12.00 per 50rds (Sold Out)
7.62 x 25 (PPSH):
-
1.) Full Length Blank :$40.00 per 100rds (LIMITED SUPPLY, email daveww2@aol.com before ordering)
-
2.) 7.62 x 25mm 3/4 Length Blank (Mil. Surplus) $10.00 per 100rds (in Stock) contains corrosive componets.
7.62 X 39 (SKS, AK 47):
-
1.) Full Length Crimped Blank (Mil Surplus/Corrosive) $16.00 per 80rds + shipping. (IN STOCK) For standard Mil. type "Screw on" BFA.
----------------------------------------------------------------------------------------------------------------------------
FRENCH:
8mm Pistol $12.00 per 50rds. (Sold out)
-----------------------------------------------------------------------------------------------------------------------------
8mm Blank Firring (Only) Pistol Blanks:
-
50rds @ $25.00 + shipping. (LIMITED SUPPLY, email daveww2@aol.com before ordering)
-----------------------------------------------------------------------------------------------------------------------------
Weapons Related Parts:
-
Screw on type (GI Type) M-1 Garand Blank Adapter (BFA) $25.00 each, includes USPS shipping if order BFA alone. If ordering with a Blanks Order... $20.00 each with Blank order.
-
In the works: BFA'd .45 1911 Barrel kits (PAPER WEIGHT.) $130.00 est. price.
________________________________________________________________________________________________________
DOWNLOAD FLYER & ORDER FORM