You need: Scissors, glue (milky type) and a bedcover, preferably stained with paint. Drape the cloth around the neck as a shawl and draw together in the centre front. Lift arms straight to to sides. Mark places in the waist/pelvis where jacket ends from back and front. Not too tight, remember the seams. Cut up towards armpits, stop before sleeves get too tight. Glue back and front together. Set the cloth on the floor and lift sleeves to straight to the sides. Cut sleeves of your taste (I cut long and loose expect in the wrists that are tighter and hold the sleeves up). Glue together, in a rough way. YOu can leave the arm pit area open and just glue some extra cloth on the hole, creating a nice loose comfortable fit. There is propably too much cloth in the backside of your neck: cut a generous piece out above the neck, narrowing towards the frontside, stopping above the breats. Leave the fringe bit with a few centimetres of collar untouched! Glue the collar bit and the right fitting back piece together. Glue some squares for pockets, attach buttons and belts - whatever. Ready!