OPERATOR’S DAILY CHECK SHEET

OPERATOR’S DAILY CHECK SHEET. Metalliferous Mines Safety India

The check sheet provides useful information which will enable on to observe the performance of the truck. The operator, in the course of his routine check everyday, should fill the check sheet in order that any defect noticed by him can be attended to immediately. This would be a very important document regarding the history of the machine. Metalliferous Mines Safety Week (Nagpur Region). Mines Safety Week Inspection at Malanjkhand Copper Project, Research & Development Project Mining, Kottayam is the Land of Letters, Latex and Lakes

OPERATORS DAILY CHECK SHEET TRUCK NO: DATE : SHIFT Start time : Finish time: Name of Operator: Code No:
*ENGILE*	*STEERING SYSTEM*
Radiator – Coolant level / Color Engine Lube & Fuel Oil Filters Check Water Seperator Oil Level in Crank Case Clean Air Cleaner Dust Coolector Service indicator, Air Cleaner Low / High Idle RPM Over Heating ( Normal water temp. 74ºC to 95ºC) Oil Pressure Min. Low Idle : 1.2 Kg/cm² Excessive Smoke – Min @ Rated RPM 2.5 Kg/cm²	Emergency Steering Steering Hard Noisy Excessive Motion Poor Response
*TRANSMISSION*	*HYDRAULIC SYSTEM*
Oil Level – Maintain Full Mark Oil Pressure Shifting Over – Heating (Above 120ºC) Retarder Operator	Hoist Cylinder Position Exposure Oil Level in Tank Slow Response Rubber Pads
*ACCESSORIES*	*AIR SYSTEM*
Ammeter Battery Lights Tyres Wipers Hydrair Supspension Front L & R Rear L & R Visual Inspection for Air, Water, Oil Leaks and Weld Cracks Remarks	Main & Emergency Air Tank Drain Condensation Pressure (Normal 108 – 118 Psi) ( HIGH / LOW) Service Brakes Parking Brakes Airline Leaks Air Horn Dump Brake
OPERATOR’S SIGNATURE

copper mining India (1980-2009)