Once the spark plugs have been installed correctly reverse the installation and put everything back on snugly fit the insulators back on the plugs, and put the ignition plate back on. Next be sure to reconnect the ignition wire to the connector on the right of the plate. I forgot to at first and when it didn't start I was getting worried but then I remembered I had to plug it back in.

Actually nothing seems to help. The cable has an internal metal crimp just in the corner. The crimp makes the insulation distance short and the double resistors pushes the spark to go through the corner to valve cover. Spark plug cable is tight. Don't even try to pull it out from the cable.