Delta 18-900L 18-Inch Laser Drill Press

The Delta 18-900L 18-inch Drill Press with Laser uses an auto-tensioning belt drive system that allows for fast and easy speed changes while maximizing transmission efficiency. The Delta 18-900L uses an oversized woodworker's table with a patented design that bevels 0 to 90 degrees left and right and tilts forward 0 to 48 degrees
Features:
Fully adjustable Twinlaser projects a bright red crosshair on the work piece at the point of bit contact
Set up for repetitive drilling, quickly and easily with the micro-adjustable depth stops and depth scale
Heavy-Duty 3/4HP motor provides ample power for demanding drilling applications
Full 6-inch quill stroke for deeper drilling applications and best-in-class capacity
Flexible LED illuminates the work surface for better visibility
Large non-tip base increases stability
What's In The Box:
Delta 18-900L 18-inch Drill Press with Laser

Rugged and versatile enough for professional use, the DELTA 18-900L 18-Inch Laser Drill Press features a heavy-duty motor for powerful performance, and an Auto-Tensioning Belt Drive System for effortless speed changes. Designed to provide the accuracy and precision you need to get the job done right the first time, this tool is ideal for woodworking.

18-Inch Laser Drill Press
At a Glance:
Provides a full 16 drilling speeds (170 - 3,000)


Full 6-inch quill stroke for best-in-class capacity


Oversized woodworker's table bevels 0-90 degrees left and right


Dimensions: 20 by 70 by 28 inches (W x H x D); 5/8-inch key chuck capacity


Backed by a five-year warranty




This professional-grade drill press is ideal for woodworking with a wide range of soft and hard woods. View larger.
16 Speeds for Drilling in a Variety of Materials
Precision drilling is easy with the DELTA Laser Drill Press. It features sixteen speeds for optimal drilling performance in various materials. The rack-and-pinion height adjustment on the oversized woodworker's table is easily raised and lowered to the desired height. The adjustable locking levers allow for easy angle adjustments to the table top while the bright TWINLASER helps provide drilling accuracy every time.
Auto-Tensioning Belt Drive System for Efficient Performance
The 18-900L is unique among other drill presses because of its time-saving Auto-Tensioning Belt Drive System, which ensures fast, easy speed changes while maximizing transmission efficiency with consistent belt tension and motor alignment.
6-Inch Quill Stroke and Best-in-Class Capacity
With a full 6-inch quill stroke, the 18-900L allows for deeper drilling or industrial applications and best-in-class capacity.
Robust Motor and Over-Sized Table for Power and Versatility
Powered by a 3/4-horsepower induction motor, the 18-900L can easily take on demanding applications. Its oversized worker's table features a patented design and bevels 0-90 degrees left and right, tilts forward 0-48 degrees. The unit has T-slots for clamping, and a removable/replaceable center insert for through-the-table drilling.
Precise, Accurate, and User-Friendly
The 18-900L also features micro-adjustable depth stops and an independent depth scale, which allows the user to zero the scale and set up for repetitive drilling in just seconds. At the same time, an LED light illuminates the work surface for visibility, and the non-tip cast iron base provides maximum stability.
Warranty Information
The DELTA 18-900L 18-Inch Laser Drill Press is backed by a five-year warranty.
What's in the Box
18-Inch Laser Drill Press with oversized table, and manual.

Micro-adjustable depth stops with an independent depth scale mean you can zero the scale and set up for repetitive drilling in seconds.

This is a scrap piece of maple held in the jaws of a large drill press vice, which has a cotton rag draped through the jaws to keep the dirt, and jaw marks off the scrap piece. I'm using this to see how good I am at hinge mortising with a chisel. I've never done it, but I've certainly seen it done often enough through my life. Seeing and doing are different things, of course...

The rounded mortises are first drilled out on the drill press with a 3/8" brad point wood bit. A sharp wood chisel will be used to clean up the final round ended mortise. The wood is African Makore.

The Milescraft 1097 is a Tool Stand Drill Press for Rotary Tools. Rack and pinion gearing allows smooth controlled plunge. Scale with depth stop allows depth control and precise repeatability. Sturdy cast aluminum base provides sturdy work area. Stong 13.5 inch metal tube allows drilling of objects up to 5 inches in height. Lock rotary tool in horizontal position for hands free sanding or polishing.

Features:
Sturdy metal head fits most Dremel style rotary tools
Spring loaded metal rack and pinion gearing for smoothe controlled drilling
Scale with depth stop allows precised depth control and repeatability
36 square inch metal base with planed surface has clamping platforms or mounting holes for stability
Lock tools in horizontal position for hands free use
What's In the Box:
Milescraft 1097 Tool Stand Drill Press for Rotary Tools