ARDUINO WATER VALVE

ARDUINO WATER VALVE - WATER VALVE

Arduino Water Valve - Anti Scald Valve - Check Angle Valve.

An electro-mechanical device that opens a valve to allow water to flow. The electric current causes a magnetic field to develop, in the solenoid coil, which then moves a metallic plunger. The plunger in turn opens the valve. May also be called a FILL VALVE.

Arduino is an Italian masculine name, with variants including Ardovino, Ardoino, Ardolino, Arduilio, Arduo and the feminine Arduina. It derives from the Germanic Hrduwin or Hardwin and has been found in Italy in the forms Ardovinus, Ardoinus and Arduinus.

An Arduino is a single-board microcontroller and a software suite for programming it. The hardware consists of a simple open hardware design for the controller with an Atmel AVR processor and on-board I/O support.

An open source embedded processor project. Includes a hardware standard currently based on the Atmel Atmega168 microprocessor and necessary supporting hardware, and a software programming environment based on the C-like Processing language. Official site is here.

Water drop collision SetUp

Mon Setup incluant la bouffe du chat!!!! Voici le code Arduino utilise : int valvePin = 9; void setup() { pinMode(valvePin,OUTPUT); // declare the valve's pin as output } void loop () { digitalWrite(valvePin,HIGH); delay(15); //open the valve for 15/1000 sec to create a drop digitalWrite(valvePin,LOW); delay(100); // Wait 100/1000 sec between the drop digitalWrite(valvePin,HIGH); delay(15); // Create the second drop digitalWrite(valvePin,LOW); delay(5000); //Wait 5 sec between the loop to restart my D80 }

Golden Crown

Just ordered a photogate & delay flash trigger kit from hiviz.com. Now looking at an Arduino board to maybe trigger a solenoid water valve. Just wish I could remember the electronics I did at school 20 odd years ago.

4L80E MANUAL VALVE BODY

ARDUINO WATER VALVE - WATER VALVE

Arduino Water Valve

Comments