|
Intake exhaust valve. Foot valve screen. Intake Exhaust Valve
Felpro PermaTorque MLS 1143 Head gasket The Multi-Layer Steel{3-layer MLS}head gasket connects the exhaust side steam holes with the main water jacket so the holes did not need to be drilled into the heads on the exhaust side.They also direct more volume of water flow to the center of the block to help "flush" the steam/heat away from the area that the two exhaust valves are next to each other,along with the high volume water pump,aluminum heads,and studs I am hoping it will cure the head gasket problem area. Exhaust #4 adjustment
Checking the valve lash of exhaust #4 using the feeler gauge. This engine requires clearance of 0.006" for exhaust valves and 0.004" for intake. Only 7 valves actually needed adjustment, and luckily none were overly tight. (Which can lead to burn valves.) Also, the ones that were too loose weren't overly loose. The previous owner performed routine maintenance on this bike himself and clearly he did a good job of it. Similar posts: three way ball valves non return valve symbol manual shut off valves gate valve pictures grinding valve seats valves manufacturers in pune worcester valve |