Npt Globe Valve : Tire Valve Types
Npt Globe Valve
globe valve
- A valve with a linear motion, push-pull stem, whose one or more ports and body are distinguished by a globular shaped cavity around the port region.
- A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body.
- A valve that lets you adjust the flow of water to any rate between fully on and fully off. Also see Gate Valve.
npt
- (NPTS) Nominal Permanent Tensile Strength. The tension that can be left in optical fibre cable for it's entire life span with guaranteed fibre survival.
- (NPTS) National Personal Transportation Study
- New Product Test. GE and Honeywell organization that tested each new CPU in Phoenix after it was built, in an area of the DVCP manufacturing floor called the "test cell." In the late 70s, lack of test cell capacity was a limiting factor on LISD's ability to deliver Multics CPUs.
Valve, Needle
This type of valve is a special case of a globe valve. The flow should (but does not always do so) come up under the needle (from the right) and then goes around the needle and out to the left. The flow pattern in most valves is set up so that when the valve is closed that the valve packing is on the low pressure side. This reduces the probability of leaks. Steam Engine. Detail of inlet manifold
Globe valve for fine control of steam supply and displacement lubricator to keep the steam slippery.
See also: butterfly valve descriptioninverted plug valvedig irrigation valvesregulator valvesolenoid valve drawingair metering valveapi plug valvebicycle tire valves typestitanium exhaust valves | 