|
Komatsu Engine Valve - Variable Bleed Valve Komatsu Engine Valve
FIAT 311C HORSEPOWER: Rated belt = 27. ENGINE: Type = Vertical in-line, 4-stroke diesel, Overhead valves, Cylinders =4, Bore = 3.228 in. Stroke = 3.543 in. Compression ratio = 20: 1, Rated speed = 2,200 rpm. STANDARD SPEEDS: Forward = 0.9, 2.2, 3.0, 4.0, 6.7 mph, Reverse = 2.1 mph. GROUND CLEARANCE: 10-5/8 in. OVERALL DIMENSIONS: Height (to top of radiator) = 48-1/4 in. Width = 50-3/4 in. Length = 98-1/2 in. WEIGHT: 4,020 lb with fuel, water, oil. BELT PULLEY: Diameter = 9-7/8 in. Width = 6 in. Speeds = l,230 rpm. PTO: 1-3/8 in. Spline shaft = 540 rpm. Shaft central between tracks. Direction of rotation = clockwise, viewed from rear. ELECTRICAL SYSTEM: 24 volts. HYDRAULIC SYSTEM: Working pressure = l,635 psi. IMPLEMENT MOUNTING: 3 point linkage. TRACKS: Tread (centre to centre) = 39-3/4 in. Width = 9-7/8 in. Length on ground = 48-1/4 in. Komatsu PC5500 Supershovel
Ladies and Gentlemen I give you the "Komatsu PC5500 Super Shovel". These huge Excavators are used in open mines to load the giant dump trucks. This is by far the largest MOC I have built. This MOC features twin 12 cylinder turbo charged engines along with the detailed main hydraulic valve system in the engine bay, a face shovel with opening bucket and static hydraulic rams. I have used the new Technic tread links (which are pretty close to the scaled size) The rams are static. I toyed with the idea of using the Pneumatic rams but they didn't look as good, as I was going for realism rather than function. Related topics: sluice valve manufacturers salami hydraulic valves solenoid valve drawing asahi diaphragm valve water heater relief valve overflow sprinkler system relief valve 3 way gate valve hydraulic shut off valve trane expansion valve problems pratt plug valve |