Blazer SI-100 Excalibur Multi-Purpose Butane Torch and Hot Air Soldering Kit

The Blazer SI-100 Excalibur, multi-purpose, butane torch and hot air soldering kit is a tool kit that provides tools for soldering, hot air blowing and torch flame needs. The torch creates a precise flame emitting from a nozzle head, allowing direct heat application to an object. It is commonly used for detailed purposes such as brazing, plumbing, soldering, heating, jewelry making, and culinary, dental, and lab applications. Tools within the kit are also used for electronic, automotive, woodworking, lapidary, and general maintenance.
The SI-100 is a multi-purpose tool kit, providing a self-igniting and cordless soldering iron, hot air blower and refillable butane gas torch. The set includes five, interchangeable tip choices: reflector, hot air blower, knife, one 3.5-millimeter chisel and one 3.0-millimeter diagonal. It also comes with a wrench, sponge, and one tube of 60/40 coiled silver tube of solder. The torch features a child-resistant mechanism, and an instant ignition switch.
The torch houses a piezoelectric ignition system, which is based on a pressurized molecular reaction, and requires no electric connection. Piezoelectric energy occurs when the trigger is activated, releasing a small, spring-loaded internal hammer that strikes a crystal, producing a spark and resulting in gas flame ignition.
With a maximum flame temperature of 2,500 degrees F, the torch has a 7.0-gram gas capacity, weighs 4.9 ounces and is 9.0 (l) inches. The case measures 10.25 (l) x 4.38 (w) x 1.5 (h) inches. This product is intended strictly for use in professional and industrial environments. In accordance with federal regulations, home use of this product is prohibited.
Since 1985, Blazer Products has created an array of professional and industrial tools and equipment. Located in Farmingdale, NY, the company manufactures a variety of torches and ultrasonic cleaners. Blazer Products is known worldwide for its original micro torch products.
The SI-100 kit comes in a hard shell carrying case, and the torch operates with a standard butane canister (sold separately).

wip attach bezel to 20 gauge sheet 1 cut sheet to near the size you need ." I am using a bit more as I will be adding a bead ring around the bezel ." 2. clean sheet of any oil then coat with flux . 3. cut 4 or 5 pieces of sheet solder and place under bezel next to sheet . 4 heat from underneath til starts to flow . 5 Imitate move heat to top and heat downward from center moving flam in circle motion fowling bezel . solder will flow around bezel in solid connection . without excess heat that will cause fire scale . 6 trim excess sheet away . Note From hear it can be start of a ring ,pendant or broach . Note if you are only going to use 1 x 1/2 inch section of a larger sheet , Always cut off the section you are going to use instead of soldering to a 3 X 3 sheet and cutting out later . It takes longer to heat up the larger piece increasing the chance of fire scale .

solder band to uneven surface Note!!! "always keep flam moving holding a constant position on the metal will melt most items when they reaches solder temp and cause more fire scale problems too " 1 place ring head or casting on carbon block 2 cut band and shape to surface . "make it a good fit, I counter cut band using rotary tool like a dremel and a 1/4 inch grind wheel" . 3 add flux 4 hold band stable with only enough downward pressure to make contact using Steel Cross-Lock Tweezers with Third Hand Base. "note too much downward pressure and band will deform when hot " 5 add solder I used hard 75 wire "as the round would lay next to the band better". 6 heat band till solder flows 7 then heat casting so solder flows to it . 8 Fin

The GB2001, Blazer’s original butane refillable micro torch, is a time-tested, gas torch that creates a precise flame emitting from a nozzle head, allowing direct heat application to an object. It is commonly used for detailed purposes such as brazing, plumbing, soldering, jewelry making, culinary, automotive and dental and lab applications.
The GB2001 has a rubber, diamond-shaped, outer body finish, for safe grip and ease of use. It features a gas flow adjustment lever to allow for ease of flame heat and precision change. Its torch flame is adjustable from yellow to more precise and hot blue flame. The torch comes with an attachable, tabletop stand for hands-free work. It offers a long burn time, compared to some other Blazer micro torch products.
The torch houses a piezoelectric ignition system, which is based on a pressurized molecular reaction, and requires no electric connection. Piezoelectric energy occurs when the trigger is activated, releasing a small, spring-loaded internal hammer that strikes a crystal, producing a spark and resulting in gas flame ignition.
With a maximum flame temperature of 2,500 degrees F, the GB2001 has a continuous burn time of approximately 1.5 to 2.0 hours, at maximum fuel volume, and has a 26-gram gas capacity. The torch head has a 90-degree fixed angle, and its flame range is 0.5 to 1.25 inches. It has a safety component that offers manual lock of the ignition, when not in use. It measures 6.0 (l) x 3.0 (w) x 2.5 (d) inches, weighs 6.8 ounces and has a black body finish. This product is intended strictly for use in professional and industrial environments. In accordance with federal regulations, home use of this product is prohibited.
Since 1985, Blazer Products has created an array of professional and industrial tools and equipment. Located in Farmingdale, NY, the company manufactures a variety of micro torches and ultrasonic cleaners. Blazer Products is known worldwide for its original micro torch products.
The GB2001 torch operates with a standard butane canister (sold separately).