MAGNETIC SCREWDRIVER BITS. SCREWDRIVER BITS

MAGNETIC SCREWDRIVER BITS. GRINDER POWER TOOL.

Magnetic Screwdriver Bits

(Screwdriver bit) A hex shank with a screwdriver tip at one or both ends to loosen and tighten recessed screws; designed for use with magnetic or power-driven screwdrivers

of or relating to or caused by magnetism; "magnetic forces"

Capable of being attracted by or acquiring the properties of a magnet

Relating to or involving magnetism

capable of being magnetized

Having the properties of a magnet; exhibiting magnetism

having the properties of a magnet; i.e. of attracting iron or steel; "the hard disk is covered with a thin coat of magnetic material"

cleared-for-takeoff 0796

The engine mount bolts were pulled and engine was jacked up ?” until I could see all the cam bearings in a row: The cam bearings were lubed with 80-90 gear oil and cam was carefully installed. Engine was lowered, mount bolts inserted and tightened to spec. Finally the back cam retainer and screws were installed. In the process I dropped the little screwdriver bit, it BOUNCED OFF the oil drain plug I installed (phew!) and landed at the back of the transmission! No cussing required this time, as I just grabbed the magnetic tool and snagged it.

Tools of the trade

Camping headlamp for better light, magnet on a stick to pick up dropped screws, rubbing alcohol and cotton swabs to get those pesky lint bunnies, paint brush and pick to get out large lint clumps, star screwdriver thingies to get the screws in deep holes, a little star screw bit to reach where the longer hand-held ones won't fit and a Leatherman to twist the bit, a magnetic bowl to hold the screws so I don't lose any, canned air to get the last bits of lint blown out and machine oil for the places that need oiled.

1 4 SOCKET SET

MAGNETIC SCREWDRIVER BITS. SCREWDRIVER BITS

Magnetic Screwdriver Bits

Comments