Silverum 30 PPM Advanced Colloidal Silver Nano Particle Technology 8 Fl.Oz. (240 ml) Highest Quality and Most Effective

SILVERUM is a safe and highly-effective 30 parts-per-million concentration of nano-sized silver particles totally dispersed in crystal clear distilled water, without additives and not bonded with other elements. SILVERUM is completely clear because it contains no additives. This is important because yellow and brown colors are indications of salt, protein or other additives and impurities, which can result in unsafe products. SILVERUM is also clear because of its superfine particle size. SILVERUM contains no other ingredients: no proteins, no silver salt compounds, no silver nitrates, no salt, no preservatives, and no artificial flavors or colors.

Pinball Lamps---AUTO LED Lighting 1142-15SMD-W.JPG22KB General low-power LED modules (such as direct lighting applications, buttons or dashboard lights) are mostly carried out with silver plastic solid crystal, which is currently in the industrial sector where LED has been the most widely used solid-crystal technology. The so-called silver plastic is actually a large number of silver powder mixed with epoxy resin inside, to make it conductive and thermal conductivity. Although a large number of silver powder can be mixed with the silver plastic to obtain a high thermal conductivity (> 30W/mK), but also because of the relative decline in the proportion of epoxy-tree, resulting in poor strength of solid crystal, making the original use of lower thermal resistance to increase the reliability degree of approach, results in a solid crystalline solid strength caused by poor quality of instability. Moreover, silver epoxy adhesive composition itself and can not withstand high temperatures, especially when the chips operate in more than 2W high current (eg 700mA), at the same time enhance the brightness, on-chip hot spots (hot spot) heating phenomenon is very may be caused by silver adhesive main reason for quality deterioration. Even so, the silver colloidal crystalline solid way to process due to lower cost, making the process relatively easy for many, is therefore still in the industrial sector has been widely adopted.

A TDS tester that's ideal for all water purification applications, wastewater regulation, aquaculture, hydroponics, and colloidal silver. Perfect for both consumer or commercial use. Carry one in your pocket at all times! Features ?The smallest and lightest TDS meter on the market. ?Sleek design is perfect for personal or consumer use. ?Advanced microprocessor technology. ?Hold Function: saves measurements for convenient reading and recording. ?Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. ?Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1 ppm. From 1000 to 9990 ppm, the resolution is in increments of 10 ppm, indicated by a blinking 'x10' image. ?Display: large and easy-to-read LCD screen. ?Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Specifications Range: 0 - 9990 ppm (mg/L) Resolution: 1 ppm Accuracy: +/- 2% ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Farenheit) Power source: 2 x 1.5V button cell batteries (included) Battery life: 1000 hours of usage Dimensions: 14 x 2.3 x 1.5 cm (5.5 x .9 x .55 inches) Weight: 34g (1.2 oz)