|
ALLEN WRENCH HOLDER : RIGID RIGHT ANGLE DRILL : APEX SCREWDRIVER BITS Allen Wrench Holder
IM1925:Lift Plate assembled The Lift Plate went together very easily. 3 struts fixed to plate with M4x12 bolts (no washers) and M4 square nuts held nicely in the slots. These M4 bolts require a 3mm Allen key. Two bearing holders mounted with M5x25 bolts and hex nuts (lightly for now), two LME8LUU linear bearings inserted, and bolts on holders tightened to fasten the bearings at the specified height above plate. M5 bolts require a 4mm Allen key. M5 hex nuts require an 8mm wrench. The special plastic ACME drive nut mounted (lightly for now) with 3 x M5x25 bolts and hex nuts. Chock Full o' Busted
So I got a bit of water in my keyboard yesterday. Unlike every five dollar PC-special keyboard I've ever owned, this $50 beauty decided it could not take the indignity and started freaking out. And since no one in their right mind would pay $50 for a keyboard assembled with NORMAL screws, I can't take it apart to clean it until I find a 0.05" allen wrench. Hence, this wonderful setup. But all that being said, I still have three screens controlled by one KB/Mouse, which is cool. Why am I complaining? Why am I still typing? Similar posts: barrel nut screwdriver 5 16 hex wrench bionic grip wrench drill press chuck guards 18 aluminum pipe wrench automotive diagnostics tool drill screwdriver bits lutz screwdriver |